12mm Metal Push Button Switch With Cable
12mm metal push button switch with pre-attached wiring, designed for compact control panels where installation space is tight and assembly time matters. Product Introduction The switch features a metal construction with a raised or flat head option, and is available in momentary or latching...
Description
12mm metal push button switch with pre-attached wiring, designed for compact control panels where installation space is tight and assembly time matters.
The 12mm metal pushbutton switch features a metal construction with a raised or flat head option, and it is available in momentary or latching operation. The pre-wired design means the leads are already soldered and sealed at the factory, so your assembly team can connect directly to a terminal block or connector without doing any soldering on the panel itself. It is a practical choice for small industrial controls, automation fixtures, and equipment that needs a durable, identifiable push button with straightforward wiring.
The metal switch has mini mouting size, so it's choosen by most of customer's product with control panels in limited space.
Products Specifications
| Mounting Hole | 12mm |
| Operation Mode | Momentary / Latching (optional) |
| Housing Material | Stainless Steel |
| Head Style | Raised / Flat (optional) |
| Configuration | 1NO / 1NO+1NC, silver contacts |
| Protection Rating | IP67 (panel mounted) |
| Illumination | Non-illuminated / Illuminated (optional) |
| Thread | M12, with nut and washer for panel mounting |
| Wiring | Pre-attached leads (typically 15–20cm) |
Note: Rated current and voltage depend on the specific contact configuration. Confirm electrical specifications with FVWIN before ordering.
Key Features of our products
Pre-wired for faster assembly.
The leads are attached at the factory, which removes the need for soldering inside a tiny panel. This reduces assembly time and lowers the risk of poor solder joints or loose connections.
Metal housing for durability.
The stainless steel housing resists corrosion and physical impact. It is suitable for control surfaces that see usually use or exposure to outdoor conditions.
IP67 protection when panel mounted.
With the proper installation using the nut and washer, the switch seals against dust and short-term water immersion. This makes it usable in environments where splashes or washdowns occur, though suitability for continuous chemical exposure should be confirmed separately.
Compact 12mm footprint.
The M12 threaded body fits standard 12mm panel cutouts, making it a direct replacement for many existing switches and suitable for small handheld controllers or compact control panels.
FVWIN exhibition
FVWIN has been manufacturing illuminated switches for 13 years. We exhibited at electronica China in Shanghai in 2020 and 2026, showcasing our illuminated tact switches and LED push button switches. At both events, we welcomed visitors from China and overseas and received positive feedback on our products.
Why Choose FVWIN
We would like to introduce FVWIN, a professional manufacturer of illuminated tact switches, pushbutton switches, toggle switches, sockets and connectors.
Leveraging our experienced workforce and cutting-edge manufacturing technology, we produce high-quality electronic components compliant with strict industry specifications. We dedicate ourselves to delivering optimized switch and connector solutions for our clients.
We acknowledge that efficiency is critical in modern supply chains. We commit to responsive service and reliable order handling. Our customer support team stands ready to provide technical consultation and resolve your concerns.
We focus on developing sustainable long-term partnerships. We strive to meet and fulfill your requirements with reliable products and services. We welcome the chance to work alongside you.
Our factory & quipment
We have horizontal injection molding machine,punching machine,vertical milling machine,life tester,insulation resistance tester,salt spray tester,load curve meter,laser engraving machine.
How to inspect LED beads
Final Solution
1. Visual check:
Check for black spots, cracks, missing glue, oxidized leads or cold solder joints.
2. Confirm polarity:
Identify anode (+) and cathode (-) by flat notch mark.
3. Set multimeter to diode mode
red probe to anode, black to cathode.
4. Judgment:
Good LED glows faintly with forward voltage reading; no light / OL = defective.
5. Power-on test at rated voltage:
Verify brightness, color and no flickering.
6. Record
Record failures and segregate defective units.
Quality Control and Manufacturing
FVWIN's manufacturing facilities include horizontal injection molding machines, punching machines, vertical milling machines, and laser engraving machines. Testing equipment includes life testers, insulation resistance testers, salt spray testers, and load curve meters.
These facilities support production and inspection activities, including durability testing, insulation checks, corrosion testing, and switching performance evaluation where applicable. Specific tests and acceptance requirements can be discussed according to the product model and project specifications.
Samples and Ordering
If you are considering this switch for a new product or replacing an existing component, tell me your required mounting size, switching function, wire length, electrical rating, and estimated order quantity with our team.
Samples may be available for fit and function testing before bulk production. Please confirm sample availability, production lead time, and customization requirements with FVWIN before placing an order.
Contact FVWIN to request a quotation, technical datasheet, or sample for your application.
Hot Tags: 12mm metal push button switch with cable, China, suppliers, manufacturers, factory, customized, wholesale, for sale, made in China, 16mm metal push button switch, 19MM LED Illuminated Push Button, 19MM Metal Illuminated Push Button Switch, 22MM Metal LED Push Button Switch, illuminated metal push button switch, metal momentary switch
